Use tweezers to remove those items and get ready to lubricate the different parts. If it is at the back, take it off as well.Īt this point, you should be able to see loose threads, lint, or other obstructions. Next, you should unplug your sewing machine and start to locate all the exterior screws.
SPINNING WHEEL BOBBIN NOT TURNING MANUAL
If you do not have a manual visit and buy the one you need. You may need it when you are trying to remember where all the parts go once you start putting it back together. That booklet should have a schematic drawing to help guide you as you work. The first step in this process is to take out your owner’s manual. Then check your tension and threading to make sure they are okay. Stop what you are doing and rewind the bobbin. You can use a tear-away or a cutaway stabilizer depending on the fabric you are working on.įinally, if your stitches are looping then you may have a bobbin that was not wound properly. This means that the fabric needs a stabilizer attached to it to keep it firm. Just switch the foot to solve this problem.Īnother problem that can arise with stitches is seeing the fabric pucker or tunnel under stitches. This problem also occurs when you are using the wrong presser foot. Stop pushing or pulling the fabric through the needle. It is with you trying to help the feed dogs do their work. Then if the stitches appear distorted as you sew, the problem is not with the machine. To solve this stitch issue, double-check to see if the needle is inserted all the way up and that the flat portion is facing the back of the machine. This problem usually occurs in a Singer when the needle has not been inserted properly.
One would be when your stitches are skipping. Many stitch problems would qualify under this heading.
0 kommentar(er)
